Zeno~SPARTA~ Posted May 18, 2022 Share Posted May 18, 2022 RC Front left click on the Battery switch RC Front right click on the Inverter switch Dash left side left click lights down to TAXI Dash left side left click switch up to ANTI-SKID LC next to ejection seat handle left click APU Start RC Front left click on the APU Gen Switch Front Dash turn on left and right MFDs (right click on dial twice each for day) Dash left side left click on CICU, JTRS and IFFCC switches RC Front left click on MWS, JMR, RWR, DISP switches rotate know to MAN Press RAlt+Home to move left engine throttle to Idle. This will start the left engine, wait until RPM reaches 60% Press RCtrl+Home to move right engine throttle to Idle. This will start the right engine, wait until RPM reaches 60% RC below keyboard left click ODU and EGI Power switched to on, wait for screen above keyboard to finish boot and menu appears RC Screen left click button next to INS<- on right RC Screen left click button next to ALT Align on left RC Screen left click button next to FAST on right RC Front left click on the APU Gen Switch to turn off LC next to ejection seat handle left click APU Start to turn off LC in front of throttles left click on YAW L and R, then Pitch L and R switches Dash Left or right MFD left click on LOAD ALL wait about 15 seconds for dots to appear besides each item on MFD Right MFD, left click on Bottom row centre CDU Left MFD, left click on bottom row left TAD Right MFD if you se INS NAV RDY left click on NAV (on left side) Backup Artificial Horizon (below right of left MFD) scroll back mouse wheel to uncage and align Dash centre below compass left click on EGI Dash centre below compass left click on STR PT LC just behind throttle left click on EAC (guarded switch) LC left click on Ejection seat handle Link to comment Share on other sites More sharing options...
Recommended Posts