Jump to content
Spartans Home

Cold and Dark Start A10c II


Zeno~SPARTA~
 Share

Recommended Posts

RC Front left click on the Battery switch
RC Front right click on the Inverter switch
Dash left side left click lights down to TAXI
Dash left side left click switch up to ANTI-SKID
LC next to ejection seat handle left click APU Start
RC Front left click on the APU Gen Switch
Front Dash turn on left and right MFDs (right click on dial twice each for day)
Dash left side left click on CICU, JTRS and IFFCC switches
RC Front left click on MWS, JMR, RWR, DISP switches rotate know to MAN
Press RAlt+Home to move left engine throttle to Idle. This will start the left engine, wait until RPM reaches 60%
Press RCtrl+Home to move right engine throttle to Idle. This will start the right engine, wait until RPM reaches 60%
RC below keyboard left click ODU and EGI Power switched to on, wait for screen above keyboard to finish boot and menu appears
RC Screen left click button next to INS<- on right
RC Screen left click button next to ALT Align on left
RC Screen left click button next to FAST on right
RC Front left click on the APU Gen Switch to turn off
LC next to ejection seat handle left click APU Start to turn off
LC in front of throttles left click on YAW L and R, then Pitch L and R switches
Dash Left or right MFD left click on LOAD ALL wait about 15 seconds for dots to appear besides each item on MFD
Right MFD, left click on Bottom row centre CDU
Left MFD, left click on bottom row left TAD
Right MFD if you se INS NAV RDY left click on NAV (on left side)
Backup Artificial Horizon (below right of left MFD) scroll back mouse wheel to uncage and align
Dash centre below compass left click on EGI 
Dash centre below compass left click on STR PT
LC just behind throttle left click on EAC (guarded switch)
LC left click on Ejection seat handle
 

Link to comment
Share on other sites

 Share

×
×
  • Create New...