NoScream~SPARTA~ Posted October 20, 2010 Share Posted October 20, 2010 USE a VAG-COM or LAPTOP & SOFTWARE http://www.ross-tech.com/vcds/download/current.html http://trick77.com/2009/07/23/unlocking-mmi-3g-hidden-menu/ Instructions: 1. Select control module 5F in VAG-COM/VCDS 2. Select “Adaptation – 10″ 3. Select channel 6 4. Set the value to 1 5. Press test 6. Press save 7. Press “Done, Go Back”, close the controller and quit the software 8. There’s no need to restart the MMI, just press CAR + SETUP for 6 seconds to enter the hidden menu Battery status capacity bar in MMI 3G http://trick77.com/2009/07/23/enabling-battery-status-bar-mmi-3g/ nstructions: 1. Press CAR + SETUP for 6 seconds to enter the hidden developer menu 2. Select “car” 3. Select “cardevextdevicelist” 4. Check the “Battery” checkbox 5. Press return key 6. Select “carmenuoperation” 7. Set the battery value to 5 8. Press return key 9. Press CAR key (exit hidden menu) 10. Restart the MMI: Press and hold down the function keys 1 (Setup), the control button 2 and the control key at the top right 3 simultaneously until the MMI VIM (VIDEO IN MOTION) MMI 2G (pre 2009) http://trick77.com/tools/mmi2g_vimcode.php MMI 3G (2009+) http://trick77.com/tools/mmi3g_vimcode.php Windows based key generator http://trick77.com/2009/07/22/mmi-vim-login-code-generator-windows-application/ REMOVING SEAT BELT CHIME Seat belt warning chime is possible to disable/enable from VAG-COM: Instruments 17, Coding, Long coding helper, Seat belt warning active active/inactive, Transfer coding, Do it!. Cluster scan: Address 17: Instruments (J285) Labels: None Part No SW: 4L0 920 931 E HW: 4L0 920 931 E Component: KOMBIINSTR. H06 0133 Revision: 00000000 Serial number: 9IC25Y088 Coding: AF16630408000008010700 Shop #: WSC 31414 790 00001 Instrument Cluster (Module 17) Usuall Default Coding on 4.2P: 2641263 New Coding: 2641203 xxxxx?x: Seatbelt Warning 0 = No Seatbelt Warning 1 = Seatbelt Warning (EU-NCAP) 2 = Seatbelt Warning (NAR Old) 3 = Seatbelt Warning (NAR New) 4 = Seatbelt Warning (EU-NCAP incl. Passenger) 5 = Seatbelt warning (NAR Old incl. Passenger) 6 = Seatbelt Warning (NAR New incl. Passenger) * 00??***: Options I o +00 = 1. K-Number (Europe/USA/Rest of World) o +01 = Smaller Fuel Tank Volume (All-Wheel-Drive) o +02 = Side Marker Lights Indicator Lamp inactive o +04 = 3. K-Number (Rental Cars) o +08 = 2. K-Number (Australia) o +16 = Clutch Pedal Switch Operation in FIS Display * 00xx?xx: Country o 0 = Germany (D) o 1 = Rest of World (RoW) o 2 = USA (US) o 3 = Canada (CAN) o 4 = Great Britain (G o 5 = Japan (JP) o 6 = Saudi Arabia o 7 = Australia (AUS) * 00***?x: Seatbelt Warning o 0 = No Seatbelt Warning o 1 = Seatbelt Warning Europe-NCAP o 2 = Seatbelt Warning USA and Canada (NAR old) o 3 = Seatbelt Warning USA and Canada (NAR new) o 4 = Seatbelt Warning Europe-NCAP (incl. passenger) o 5 = Seatbelt Warning USA and Canada old (incl. passenger) o 6 = Seatbelt Warning USA and Canada NAR new (incl. passenger) * 00xxxx?: Options II o 1 = Standard ( o 4 = Washer Fluid Warning inactive (11/2006 >) o 8 = Washer Fluid Warning active (11/2006 >) Goto 17 dash and write down your original code then alter the second digit from the right to deselect seatbelt warning chime by entering 0 in that position. ______________ Link to comment Share on other sites More sharing options...
NoScream~SPARTA~ Posted October 20, 2010 Author Share Posted October 20, 2010 WINDOW OPENING VIA KEY FOB Convenience opening of windows: In some markets the ability to open and close windows with the keyfob (by holding down lock/unlock key) is disabled. Ross-Tech reports in the link above that by going to Cent. Conv. 46, Coding, Long Coding Helper, clicking Comfort Operation: Remote Control active, then Transfer coding, Do it!. LAP TIMER + NEEDLE SWEEP (SPEEDOMETER & TACHOMETER) ON START Enabling lap timer and gauge test/needle sweep: Ross-Tech have published (http://www.ross-tech.com/VAG-COM/cars/audiB8.html) instructions and a new version of their software (make sure you have the latest) to enable or disable lap timer (Instruments 17, coding, long coding helper and check Lap Timer active under one of the bytes, click them to find it) and gauge test/needle sweep in the instrument cluster (Instruments 17, coding, long coding helper and check Gauge Test/Needle Sweep active under one of the bytes). With model-year 2010 the laptimer apparently also shows the oil temperature, perhaps readying for RS4/RS5... http://www.audienthusiasts.com/VagComGauges.html This will sweep the gauge needles through their full range automatically when you start the engine. [17 - Instruments] [Coding - 07] -> [Long Coding Helper] -> Byte 1 Bit -> 0 Change 0 to 1 Or Check the box for "Gauge Test/Needle Sweep active" Link to comment Share on other sites More sharing options...
NoScream~SPARTA~ Posted October 20, 2010 Author Share Posted October 20, 2010 2010 AUDI'S ONWARDS Needle Sweep: [select] [17 - Instruments] [Coding - 07] [Long Coding Helper] Click on each of the Byte numbers in step 3) and you'll see the selectable options below. Check the box for "Gauge Test/Needle Sweep active" [Do It!] Enabling Lap Timer [select] [17 - Instruments] [Coding - 07] [Long Coding Helper] Click on each of the Byte numbers in step 3) and you'll see the selectable options below. Check the box for "Lap Timer active" [Do It!] Hidden menu in 3G MMI [select] [5F - Information Electr.] [Adaptation - 10] Choose Channel 6 change value from 0 to 1 [save] [Done] Or, if you don't have MMI 3G for the hidden menu: Hidden menu in MMI high: STG 07 - Control Head STG Adaptation -> Channel 8 change 0 to 1 Link to comment Share on other sites More sharing options...
Recommended Posts