Jump to content
Spartans Home

Squeezebox duet (Color codes)


Recommended Posts

Taken from the manual:

http://www.logitechsqueezebox.com/support/...user-guide.html

 

 

 

Appendix B: Button Color Codes

The following information covers the colors displayed by the button on Squeezebox Receiver. It is useful for troubleshooting.

 

 

No light: Squeezebox Receiver is OFF.

 

Low white: Squeezebox Receiver is ON but no music is playing.

 

Bright white: Squeezebox Receiver is ON and music is playing.

 

Fast blinking white: Automatic software update is in progress.

 

Solid red: Starting up.

 

Slow blinking red: Waiting to be configured for your network.

 

Fast blinking red: Factory reset in progress.

 

Yellow: Connecting to your network.

 

If the light remains yellow, it means that the player is having trouble connecting to the network. If you are using a wireless network, please see the Troubleshooting section in this User Guide.

 

Green: Connected to your network and waiting to be assigned an IP address by the DHCP server.

If the light remains green, confirm that your wireless router is providing DHCP service. In some wireless network installations, the router may be configured to limit the number of IP addresses for security purposes. If DHCP is running correctly, check to see if the router has run out of IP addresses.

Squeezebox? Duet User Guide 27

 

Blue: Connected to the network and waiting to connect to a music source (such as SqueezeNetwork or SqueezeCenter).

If you are attempting to connect to SqueezeCenter and the light remains blue, the most likely cause is a firewall running on the computer on which SqueezeCenter is installed. See Appendix A: Configuring Your Firewall. If you are attempting to connect to SqueezeNetwork and the button remains blue, check to make sure that your Internet connection is working correctly.

 

Blinking Purple: This indicates an unrecoverable hardware error. Please contact Logitech Technical Support for an RMA. Even if cycling Squeezebox Receiver?s power alleviates the problem, the player should still be returned for a replacement.

To restart Squeezebox Receiver, press and hold the button for three seconds until it begins slowly blinking red. To perform a reset to factory settings, hold the button for five seconds until it quickly blinks red.

Link to comment
Share on other sites

 Share

×
×
  • Create New...