Jump to content
Spartans Home

Cold and Dark Start for AH64 D Apache


Zeno~SPARTA~
 Share

Recommended Posts

This is a work in progress and will be updated and or corrected

 

Shut Door (Lctrl C works)
LC right click Master Ignition Switch to BATT
LC right Click APU Cover to open
LC left click APU button to start APU, wait for ON to appear
LC right click No 1 Engine Start (left engine), on left MFD when NG% > 20% Ralt Home to advance left throttle to Idle. Wait for NG% to stabilise around 67%
LC right click No 2 Engine Start (right engine), on left MFD when NG% > 20% Rshift Home to advance left throttle to Idle. Wait for NG% to stabilise around 67%
LC Advance throttles to fly
LC left click on APU button to turn off
LC Left Click on APU cover to close
Right of dash CMWS Power Switch to on
same location CMWS Flare switch to armed
same location CMWS operation switch to bypassed
left click MFD WPN button (Bottom left)
left click BORESIGHT
Top centre of Dash Look at concentric circles through IHADSS
Move your head until circles are concentric and reticule in eyepiece aligns with centre circle
When aligned press Boresight Polarity BS on left side of MFD (or bind Boresight Polarity BS to a key)
Right of dash uncage Artificial Horizon by scrolling mouse wheel until red bar disappears and align with "horizon"

INS(?) alignment is automatic, however you still need to check.
left click on TSD bottom row of MFD buttons
left click on UTIL top row of MFD buttons
check POSITION CONFIDENCE, INU1 and INU2 should be green, if not wait before moving.

 

 

Link to comment
Share on other sites

 Share

×
×
  • Create New...